Aluminium Baseboard Profile 80mm Decorative Wall Skirting Protector Skirting Board
| Name | wooden skirting board, skirting board aluminium, aluminium skirting melbourne, 100mm skirting board, skirting board corner covers, aluminium skirting trunking, grey skirting boards, brushed aluminium skirting |
| Material | Aluminium Extrusion Profile, Alloy 6063/6061/6005/6060 T5/T6 |
| Shape | Flat, U-Shape, Round or Customized, L, various shapes |
| Length | 2.5m or 2.7m, can be customized |
| Surface Treatment | Anodized, Polished, Electrophoresis, 8K, Brushed, Electroplate |
| Color | Sliver, Black, white, Gray, customized |
| Feature | Waterproof, Durable, Water Resistant, Easy clean, Decoration |
| Package | Stick transparent film every piece, 100 pieces in 1 carton |
| Application | Industial, kitchen canbinet, door, Floor, wall |
| Installation Introduce | Using silicone glue / titebond paste to bond with other materials such as brick, stone, wood, glass. |
Aluminum baseboard is a new type of decorative material. It has good decorative effect, high strength, strong flexibility, simple and fashionable. Therefore, it is more and more used in baseboard decoration. The following editor will share with you What are the installation methods and precautions for the aluminum baseboard:
Aluminum baseboard installation method:
1. Observe whether the corner floor and wall are flat. Use a spatula to smooth out the uneven ones and clean them. Otherwise, the baseboard will bend and bend and not fully adhere to the wall, leaving unsightly gaps.
2. After sawing a section of 15 cm long aluminum alloy skirting, clip the buckle to the card slot on the back, leaning against the wall to mark the buckle hole, use a special tool to drill a hole on the wall, and use it later The plastic pins are nailed into the holes just punched. Fix the buckle to the wall with screws.
3. The protruding corner of the wall is called a positive corner, and the recessed corner is called a negative corner. To install the yin and yang corner is to use the yin and yang corner to draw the fixed point position on the wall, then take the hole, nail the plastic, and then fix the yin and yang corner on the wall corner with screws.
4. At last, measure the size and distance of each segment with a tape measure, cut out the corresponding size with a cutting machine, and clip it on the corresponding buckle. The length of each aluminum baseboard is 3 meters. When the wall length exceeds the length of the baseboard, a fastener must be installed in the middle of the interface to ensure the smoothness of the baseboard.
Precautions for the installation of aluminum alloy skirting:
1. The maximum gap between the skirting line and the floor should be less than 3mm.
2. Before paving the foot line, shovel the wall with white cement, and then pave the foot line. After paving, pay attention to the protection of the foot line to prevent a large amount of paint from sticking to the surface of the foot line when painting or spraying. Can't be cleaned up.
Aluminum baseboards are the same as other material baseboards, which balance the visual effect in the home and protect the wall from impact. We must pay careful attention to the installation of aluminum alloy baseboards to avoid improper installation. Good influence on the overall decoration effect of the home.
Our services cover all industries and reach all parts of the world.
